I have 2 x R510 APs, I attempted an upgrade One upgraded perfectly the other did not.

  • 1
  • Question
  • Updated 3 weeks ago
  • Acknowledged
I have 2 x R510 APs, I attempted to upgraded them through the admin / Web login to Ver 200.5.10.0.291. One upgrade perfectly the other did not. It reverted its self to default and I cant get to it. It has renamed itself RuckusAP. It shows itself as disconnected in the interface and when I try to restore it tells me because I upgraded that the versions are a mismatch. is there a way to get to the AP or has it died. I have tried connecting it to a switch then hard setting a laptop to the switch, it wouldnt connect. I get green power light and a flashing CTL so I believe the unit is good. Any thoughts would be helpful
Photo of David Perkins

David Perkins

  • 1 Post
  • 0 Reply Likes
  • frustrated

Posted 3 weeks ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2588 Posts
  • 353 Reply Likes
If you have DHCP and a def-gw on your LAN, try simply connecting to your network.The AP that has created the network on 200.6, should recognize the new AP andupgrade/configure it.