I Can't Define the bandwidth limit

  • 1
  • Question
  • Updated 12 months ago
Hello,

When I set the bandwidth limit (of 3 Mbps, for example), I get the following message (see picture in french): The uplink must be between 0.1 and 200.
The ZD1200 is 9.13.1.0 build 11

Photo of JackWd

JackWd

  • 3 Posts
  • 0 Reply Likes

Posted 1 year ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
Not a known bug that I can find, but 9.13.2 is current MR.
https://support.ruckuswireless.com/software/982-zd1200-9-12-3-0-28-mr3-software-release
Photo of JackWd

JackWd

  • 3 Posts
  • 0 Reply Likes
Thank you for your reply.
I can not find the version 9.13.2

This is a beta version?
Photo of Michael Brado

Michael Brado, Official Rep

  • 2041 Posts
  • 285 Reply Likes
Oops, please stand by.  Pending release notes finalization.
Photo of JackWd

JackWd

  • 3 Posts
  • 0 Reply Likes
any good news
Photo of David Vine

David Vine

  • 3 Posts
  • 0 Reply Likes
To Michael Brado .... Thanks for the moderation, BUT I use FRENCH versions (and English) of software AND the decimal point is different in the two languages .. French windows uses (,) and English widows uses (.) .. I have had this issue MANY TIMES ... When you type 1,0 its taken as a TEXT not a number !
Photo of David Vine

David Vine

  • 3 Posts
  • 0 Reply Likes
IF you care to look at the image .... The text choice box is 1,0 (virgule) and the message is 0.1 - 200  (Zero POINT one) this is a recurrent problem with ENGLISH/FRENCH contradictions in Software...
Liaison montante doit être un NOMBRE entre 0.1 -200
Uplink must be a NUMBER between 0.1 -200
(Edited)
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
Welcome David, I'll have Tech Support create a ticket and bug with your details. 
Thanks and best regards!
(Edited)
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
Ticket # 487622, JIRA bug ID ZF-15899.