I cannot connect to my Ruckus R300

  • 1
  • Question
  • Updated 2 years ago
After setting up my Ruckus R300, I cannot connect any device to my wireless network, I;m able to see the the wireless network but when I try to connect and enter the password for SSID and doesn't connect.
Photo of Marco Torres

Marco Torres

  • 1 Post
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2180 Posts
  • 300 Reply Likes
Does it work if you try to connect to an SSID with Open authentication? 
Do you get an IP address and can you ping network hosts ok?
If so, are you sure your passphrase is correct?  Does it work for other clients?
Photo of Sean

Sean

  • 346 Posts
  • 88 Reply Likes
Try removing the passphrase first and determine if can you connect.

If you can, then it's just a passphrase mismatch; make it something easy like testtest and then try to reconnect.

If you cannot connect then whats your network topology look like (Example):

AP IP = 192.168.0.2
AP NM = 255.255.255.0
AP GW = 192.168.0.1

Router and DHCP = 192.168.0.1

Also are you using any VLANs on your WLAN/Network.