I can not add an AP to my SZ

  • 1
  • Question
  • Updated 10 months ago
  • Answered
I have a SZ but I can not add an AP to the controlerI'm using the "set directory ip" tells me that it does not recognize the command.

I understand that's another command. But I do not know what the procedure is for switching from firmware sw ZD to SZ.

Could you help with the procedure?

My AP is an R500
Photo of Edher Angel Velasquez Avalos

Edher Angel Velasquez Avalos

  • 10 Posts
  • 0 Reply Likes

Posted 10 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2101 Posts
  • 297 Reply Likes
Hi Edher,

    The command is "set scg ip a.b.c.d" to direct your AP to a SmartZone controller.

https://support.ruckuswireless.com/answers/000003403
Photo of Edher Angel Velasquez Avalos

Edher Angel Velasquez Avalos

  • 10 Posts
  • 0 Reply Likes
Thank you.
But if my AP has been working on a ZD. And now it's going to work on a SZ, would it have to do some upgrading to the AP?
Or would I just connect it and give you the command you tell me?
Photo of Big Dog

Big Dog

  • 60 Posts
  • 10 Reply Likes
Try upgrade firmware 100.0.0.127 version to your AP and then connect it to your Sz all will be ok