Just wondering how to install these .bl7 updates. When I go to update in my panel, it just says that it is not a valid upgrade image.
- 2 Posts
- 0 Reply Likes
Posted 5 years ago
Primož Marinšek, AlphaDog
- 413 Posts
- 49 Reply Likes
You would require a TFTP server. Then you would neet to have a control file with TFTP parameters that you would upload to the AP.
What are you upgrading?
What are you upgrading?
- 2 Posts
- 0 Reply Likes
Primož Marinšek, AlphaDog
- 413 Posts
- 49 Reply Likes
- 860 Posts
- 51 Reply Likes
@Dan,
.bl7 files are standalone AP images.
If your AP's are under control of a ZoneDirector, the ZD is in control of updating the APs. So..as Primož hinted you need to upgrade the ZD and it in turn will upgrade the connected APs.
Hope this helps!
.bl7 files are standalone AP images.
If your AP's are under control of a ZoneDirector, the ZD is in control of updating the APs. So..as Primož hinted you need to upgrade the ZD and it in turn will upgrade the connected APs.
Hope this helps!
Related Categories
-
ZoneDirector
- 2438 Conversations
- 676 Followers
-
Ruckus Indoor APs
- 1550 Conversations
- 640 Followers