How to re-create root CA on ZD?

  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi. I need to re-create the root CA on my zonedirector 1100, because I am not able to see any information about ap ́s managed by zonedirector. The zonedirector is registered on the flexmaster.

Thanks
Alejandro
I have read the following post:
https://forums.ruckuswireless.com/ruc...
Photo of Alejandro Mendez

Alejandro Mendez

  • 24 Posts
  • 2 Reply Likes

Posted 3 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
If you’re able to SSH to your ZD, login with your admin credentials and you can reset your certificate thru the command
interface. This will restart your ZoneDirector after certificate is reset.

ruckus> en
ruckus# config
ruckus (config)# certificate
ruckus (config-certificate)# restore

ZoneDirector will restart now to apply the changes in the certificate settings.

[ and you lose your connection ]

Run a continuous ping from a DOS command prompt window, until your ZoneDirector
replies again, when you can try the HTTPS WebGUI once more.
Photo of Alejandro Mendez

Alejandro Mendez

  • 24 Posts
  • 2 Reply Likes
Hi Michael

I had made the certificate restore, but the issue is still happening .
Dou you have some others recommendations?

Thanks
Alejandro
Photo of Alejandro Mendez

Alejandro Mendez

  • 24 Posts
  • 2 Reply Likes
Hi Michael.

Sorry, It,s working now.....

Thanks