How i can modify AP Heartbeat?

  • 1
  • Question
  • Updated 8 months ago
  • Answered
Hi Guys,
 i need to modify the Access Point heartbeat, where i can find this fieldin the controller?
Photo of Enrico

Enrico

  • 3 Posts
  • 0 Reply Likes

Posted 9 months ago

  • 1
Photo of Albert Pierson

Albert Pierson, Employee

  • 130 Posts
  • 112 Reply Likes
Hi Enrico,

This option is not configurable via the SZ GUI or CLI but can be modified in the AP directly using the set scg command:

-> {config|heartbeat} interval <secs>. 30-300.


rkscli: set scg heartbeat interval 60
OK

This is verified by the get scg command

rkscli: get scg

------ SCG Information ------
SCG Service is enabled.
AP is managed by SCG.
State: CONNECTED
Server List: 12.111.80.197,10.1.4.11
SSH tunnel connected to 12.111.80.197
Failover List: Not found
Failover Max Retry: 2
DHCP Opt43 Code: 6
Server List from DHCP (Opt43/Opt52): Not found
SCG default URL: RuckusController
SCG config|heartbeat intervals: 300|30
SCG gwloss|serverloss timeouts: 1800|7200
-----------------------------
OK

Note the default value is 30 seconds which is also the minimum value.

Also note - by increasing this value you will delay the time it takes for an AP to move to a new node in a multi node cluster as the heartbeat loss is used to determine if the AP can still connect to the SZ.

It is possible to configure this option on all AP's in a Zone by using the SZ Diagnostic Script > AP Script feature.  See this Knowledge article for details AP CLI scripts:

Execute AP CLI commands (for configuration options not available in SCG) into all the APs assigned to a zone
https://support.ruckuswireless.com/articles/000004057


Modifying the heartbeat time is also covered in Knowledge base article:

How to set AP heartbeat timer to vSCG or vSZ or SZ100? 

The article provides CLI command for changing AP heartbeats timer to vSCG or vSZ or SZ100
https://support.ruckuswireless.com/articles/000004971

I hope this information is helpful.

Thank you for choosing Ruckus Networks products.





Photo of Enrico

Enrico

  • 3 Posts
  • 0 Reply Likes
Thanks