How do I get OIDs to obtain information from APs controlled by Virtual SmartZone 3.6.2?

  • 1
  • Question
  • Updated 8 months ago
  • Answered
I had downloaded the mibs from the link below, but I don't have the OIDs I want:

https://support.ruckuswireless.com/software/1869-smartzone-3-6-2-mr2-snmp-mibs-for-sz-100-and-vsz-e-zip-b509

 I wanted the OIDs to be inserted into Zabbix, for monitoring the connection status of the AP, the number of clients connected, and the CPU usage of the AP.
Photo of Cesar Murilo

Cesar Murilo

  • 12 Posts
  • 1 Reply Like

Posted 8 months ago

  • 1
Photo of Diego Garcia del Rio

Diego Garcia del Rio

  • 131 Posts
  • 52 Reply Likes
I managed to get them into zabbix. You need to use the stand alone AP mibs and then maybe play around with a mib browser

See here https://support.ruckuswireless.com/so...
(Edited)
Photo of EightOhTwoEleven

EightOhTwoEleven

  • 176 Posts
  • 42 Reply Likes
This is correct, use a MIB browser (or even snmpwalk) to find the needed OID.
Photo of Michael Brado

Michael Brado, Official Rep

  • 3298 Posts
  • 523 Reply Likes
I found some advice in a KBA-3141: MIB files for Zabbix tool

--Since Zabbix  files do not  support MIB files, we need to convert the MIB files into XML format .

--We can convert  MIB files into XML format by using the link:http://www.snmpsource.com/snmp_mib_viewer.asp

--Once after converting we can upload the file into zabbix tool,which helps to monitor the network.