How can i enable SNMP for the APs in the Cloudcontroller?

  • 1
  • Question
  • Updated 6 months ago
I have to enable SNMP for the APs in our Cloud Controller, but i cant find the Setting for this. Ping is working, but SNMP request not, so i think its disabled. Since the Firmware 200.1.9.12.62 MR SNMP is supported for Unleashed APs, so it should work.

Someone who can help me?

Regards Dennis
Photo of Dennis Stormer

Dennis Stormer

  • 6 Posts
  • 0 Reply Likes

Posted 6 months ago

  • 1
Photo of Dan LaMay

Dan LaMay

  • 7 Posts
  • 1 Reply Like
Dennis,

You will want to upgrade to 200.2 and download the SNMP Guide from our Support site to get SNMP traps up and running.
Photo of Dennis Stormer

Dennis Stormer

  • 6 Posts
  • 0 Reply Likes
Hi Dan,

thank you for your replay, but I thought the APs upgrade automatically when they connect to the Cloud? How i can upgrade them manually? Where can i configure that it is allowed to manage them from other subnets?
Photo of Dan LaMay

Dan LaMay

  • 7 Posts
  • 1 Reply Like
Yes just click on the upgrade button and if you have Internet access it will upgrade to the newer release.
Photo of Dennis Stormer

Dennis Stormer

  • 6 Posts
  • 0 Reply Likes
The APs have the Firmware 3.4.0.1.1390. Where i can get the SNMP Guide for the Ruckus Cloud? Can you post a link?
Photo of Dan LaMay

Dan LaMay

  • 7 Posts
  • 1 Reply Like
Well the first code release that you stated was for Unleashed, now it appears that you are using the Cloud with 3.4.x and for that you will need to call into our Support organization to see when SNMP will be supported in the Cloud offering.
Photo of Dennis Stormer

Dennis Stormer

  • 6 Posts
  • 0 Reply Likes
Ok, that means not supported yet. Then i missunderstood the Release Notes. Ruckus Cloud is not useable at the moment....too many problems, too less Features vs Unleashed and Controllerbased. Thank you Dan.

/Closed
Photo of Phal

Phal

  • 13 Posts
  • 0 Reply Likes