hi, we try to update zone director firmware from to

  • 1
  • Question
  • Updated 2 years ago
hi, we try to update zone director firmware from to and it doesn't work the zone director does not complete the update and now all device are in disconnected status, we try to reset to factory default and it still doesn't work
Photo of admin admin

admin admin

  • 1 Post
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Martin

Martin, Official Rep

  • 315 Posts
  • 80 Reply Likes
Hi admin admin,

What is the current status then? if you use the console port, do you get a prompt or nothing at all?

What model ZD you have ? 


Photo of Mitchell Axtell

Mitchell Axtell

  • 86 Posts
  • 25 Reply Likes
Does it state in the logs that the APs aren't supported? Did you try this in Internet Explorer?  You will need to roll it back to 9.6.1, then see here: https://forums.ruckuswireless.com/ruckuswireless/topics/zd1100-err-ssl-version-or-cipher-mismatch

"Adding on here- you can enable SSLv3 on Internet Explorer.  If you do, make sure to add the site to the compatibility view list or upgrading the ZD from IE will corrupt the firmware."