Hi one of my AP is disconnectet -

  • 1
  • Question
  • Updated 1 year ago
  • Answered
One of my AP is disconnectet - I don't know how to reconnect it Again or where in ZD1200 can I reconnect my AP
Photo of Holbaek Camping

Holbaek Camping

  • 9 Posts
  • 1 Reply Like

Posted 1 year ago

  • 1
Photo of Big Dog

Big Dog

  • 60 Posts
  • 10 Reply Likes
Hi guy your AP should be reconnect himself to the ZD.
Just make sure that your wire are right and you network parameter such as Ip address are right
Photo of Holbaek Camping

Holbaek Camping

  • 9 Posts
  • 1 Reply Like

Hi Puppie,

At the moment I can'tg any contact with the AP - I have take it Down and set it directly in my Network but still no contact with the AP - so I think it's dead - but I don't know

Photo of Big Dog

Big Dog

  • 60 Posts
  • 10 Reply Likes
What about ethernet link? Is it blinking?
Photo of Jim

Jim

  • 2 Posts
  • 1 Reply Like
may want to try a hard reset on the AP. Then verify it is operational by connecting to it directly using the default IP. Once verified it is operational, plug it back into your network and it should find the 1200 and get it's configuration.
Photo of Holbaek Camping

Holbaek Camping

  • 9 Posts
  • 1 Reply Like

Hi there - well I can tell that the AP is dead - I have try this

Make a static IP adress on my laptop and then with wire connect the AP to my laptop and see if I can connect to the IP on the AP - try to connect - but the LED where you put the wire in the AP dosn't light up - I'm on contact with Ruckus right now for a RMA