Guest access and Cisco ASA

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hi,

We have a ZoneDirector 1100, with several AP's. In our network we have 2 vlan's, connected to a Cisco ASA 5512x. We use a separate vlan for our guest network, with guest-passes.
But when i connect to the Guest network, i do not get the ruckus guest access page. I get a blank page, i think this has to do with the firewall in the ASA. Which ports need to be open for the guest network to connect to the zonedirector?

Thanks
Photo of Thijn Slaats

Thijn Slaats

  • 1 Post
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
FW ports for Guest VLAN to ZD:

HTTP (tcp:80), and tcp:9999, 9998, 9997
Photo of Bezeq international

Bezeq international

  • 2 Posts
  • 0 Reply Likes
hii

i got some other issue ....

i have redirected all the guest network to an html page that runs on IIS(not on my LAN).
what are the things that needed to be configured on the IIS server inside the HTML ....
i hope my question is clear ... looks like i can not add a topology file to here ...

thanks for any help in advence.

Regards.
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
If you wish to host the client login page, not on Ruckus Zonedirector (Guest Access), then you need to deploy HotSpot WLAN solution instead. 
You control authentication and can further customize your greeting page beyond that of our Guest Access solution.