Getting a US-bought ZoneFlex 7363 to work on a UK ZoneDirector

  • 2
  • Question
  • Updated 3 months ago
  • Answered
I am in the UK and I have a ZoneFlex 7363 bought from the US. It is set to US and cannot be changed.

What are the issues with connecting to ZoneDirectors? Will it never connect to a UK ZoneDirector? Can the AP firmware be changed to allow the country setting to be changed? Can a US ZoneDirector be used in the UK. etc.
Photo of Timothy Carrington

Timothy Carrington

  • 3 Posts
  • 0 Reply Likes

Posted 5 years ago

  • 2
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 923 Posts
  • 208 Reply Likes
Hi Timothy Carrington

As per FCC regulation, any RF device bought in the US, must be used in the US only. For this reason US country code is locked to the device.

As long as US AP is connecting to UK ZD it will_NOT_connect however you can set the country code on ZD to US and then US AP would connect to it.

I am not in the UK so not well versed with RF regulation for UK hence would request to contact a local Ruckus sales engineer who can advice you on the options you have and whether it is wise to change UK ZD to US or not.

Firmware upgrades will not fix this

Hope this helps.

PS: I am saying from experience as i had the honor to buy Ruckus AP online and it turned out to be US AP device which i was not able to connect to ZD on India country code hence using it as standalone with minimum transmit power.
Photo of Heath Barnhart

Heath Barnhart

  • 5 Posts
  • 1 Reply Like
There is an AP cli command: set countrycode UK

Have you tried that?
Photo of Michael Brado

Michael Brado, Official Rep

  • 3286 Posts
  • 518 Reply Likes
That works only on the -WW (world-wide) AP models, that can be set to anything except US mode.
Photo of Timothy Carrington

Timothy Carrington

  • 3 Posts
  • 0 Reply Likes
no I hadn't:

get boarddata shows

Fixed Ctry Code: yes

and

rkscli: get countrycode
Country is US
OK

and

rkscli: set countrycode UK
parameter error
set countrycode

rkscli: set countrycode uk
parameter error
set countrycode

so I don't think I'll have any luck with that.

I sold this 7363 and it got returned as not working with a UK ZoneDirector. This appears to be normal functionality for a US-locked AP.

The weird thing is that I sold the other 3 of these (I bought 4 brand new from USA last March 2014) in July 2014 and the buyer says they are working fine on his UK ZoneDirector.

I would like to re-list it but I don't want to annoy another customer. Would be nice to know the difference between these two UK ZoneDirectors so I can sell it to someone whose ZD will accept it.
Photo of James Franco

James Franco

  • 1 Post
  • 0 Reply Likes
Hi, just in case it may help, I had the following problem : my Access Point ZF7363 bought in the US was not connecting to my Zone Director 1100.

I tried many things, like upgrading manually the firmware of the AP which didn't work.

The solution in my situation was to connect to the AP using puttin program and "set countrycode CH"...CH being for Switzerland.

After a reboot the AP was recognized by the ZD.

And everything is working perfectly.

Hope it helps!
Photo of Rasmus Hecter

Rasmus Hecter

  • 2 Posts
  • 0 Reply Likes
Hi - where do i find or/and use the "puttin program"? Do i enter the AP first via 192.168.0.1 or?

Thanx for the help
Photo of Syamantak Omer

Syamantak Omer, Official Rep

  • 259 Posts
  • 100 Reply Likes
Hi Resmus,

First of all, a Ruckus AP comes in two different country wise product code,

1- Country specific where country code is fixed and cannot be changed. Product name will look like below. Here AP model is H510 and its product country code is US which is fixed and cannot be changed.

xxx-H510-UK00 xxxxxxxxxxxx

2- APs which can be used World Wide and their country code can be changed. For example, refer below. Here it is a H510 model and product country code is WW (World Wide) so you can change the country code depending upon which country you are going to use the AP.

xxx-H510-WW00 xxxxxxxxxxxx

To check if your AP is fixed to a country code or not, run below command and look for "Fixed Ctry Code:" in the output. If it says "no" means AP is for WW use and if it is set to "yes" then AP can only be used as per it's product country code.

get boarddata

Example output:

name:     T310
magic:    xxxxxxxx
cksum:    e47
rev:      5.4
Serial#:  xxxxxxxxxxxx
Customer ID: 4bss
Model:    T310D
V54 Board Type: GD56
V54 Board Class: QCA_ARM
Random#:  3934 3732 3436 3439 3764 3032 3062 6561
symimgs:  yes
ethport:  1
V54 MAC Address Pool:  yes, size 16, base xx:xx:xx:xx:xx:C0
major:    1027
minor:    11
pciId:    0000
wlan0:    yes xx:xx:xx:xx:xx:xx
wlan1:    yes xx:xx:xx:xx:xx:xx
eth0:     yes xx:xx:xx:xx:xx:xx
eth1:     yes xx:xx:xx:xx:xx:xx
eth2:      -  xx:xx:xx:xx:xx:xx
eth3:      -  xx:xx:xx:xx:xx:xx
eth4:      -  xx:xx:xx:xx:xx:xx
eth5:      -  xx:xx:xx:xx:xx:xx
uart0:    yes
sysled:   no, gpio 0
sysled2:  no, gpio 0
sysled3:  no, gpio 0
sysled4:  no, gpio 0
Fixed Ctry Code:  yes
Antenna Info:  yes, value 0x00007372
usb installed:  yes
Local Bus:  disabled
factory:  yes, gpio 8
serclk:   internal
cpufreq:  calculated 0 Hz
sysfreq:  calculated 0 Hz
memcap:   disabled
watchdg:  enabled
FIPS SKU:    no

I hope this helps.

Regards,
Syamantak Omer
Photo of Rasmus Hecter

Rasmus Hecter

  • 2 Posts
  • 0 Reply Likes
Thanx for the reply. So i have about 16 AP's with the code EU01 that is controled by the ZD.
So can i use APs with the code WW00  and combine them with these EU01 if i just setup the WW00 to the country code my ZD has?
I can't find any zoneflex 7363 that has the code EU01.
Photo of Heath Barnhart

Heath Barnhart

  • 5 Posts
  • 1 Reply Like
I'd never messed with the command, but did remember seeing it so I thought I would let you know.
Photo of Rob Frain

Rob Frain

  • 2 Posts
  • 0 Reply Likes

Sorry to bring up an old thread, Im in the exact same situation now with a US AP and a UK ZD. Did you manage to change the AP to a UK one via software update or firmware at all?


Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 923 Posts
  • 208 Reply Likes
you have two ways of fixing it:

1) set the county code on ZD to US and connect this US locked AP. this should work. After this, Remember you making your gear work as per US regulation and NOT UK.
2) work with TAC as i heard that they have some "internal only" commands to unlock this AP to work with any ZD. this is upto their discretion

PS: US locked AP's are supposed to be used in US only..
Photo of Timothy Carrington

Timothy Carrington

  • 3 Posts
  • 0 Reply Likes
from what I remember, I had to refund the first customer, and I was just as honest as I could be with the second advert. It sold and AFAIK worked fine for that customer, though I don't remember if it was with a ZD or standalone. I didn't muck about with firmware etc.
Photo of Neil Oakman

Neil Oakman

  • 1 Post
  • 0 Reply Likes
Ruckus use ISO codes. So, use: set countrycode GB
Photo of Rob Frain

Rob Frain

  • 2 Posts
  • 0 Reply Likes
Ruckus were great. We have a support contract with them and managed to change it over for us. Its now locked to GB.
Photo of karimovic

karimovic

  • 6 Posts
  • 0 Reply Likes
Sorry to learn up an old string, Im in precisely the same circumstance now with a US AP and a UK ZD. Did you figure out how to change the AP to a UK one by means of programming refresh or firmware by any means?
Photo of karimovic

karimovic

  • 6 Posts
  • 0 Reply Likes
Sorry to learn up an old string, Im in precisely the same circumstance now with a US AP and a UK ZD. Did you figure out how to change the AP to a UK one by means of programming refresh or firmware by any means?
THANKS FOR ANSWERING ME PLEASE 
see: https://appsync.biz/dafont/ , https://appsync.biz/123movies/ , https://appsync.biz/filehippo/
(Edited)
Photo of Abi

Abi

  • 120 Posts
  • 59 Reply Likes
Hi karimovic,

Please contact support, who should be able to help you to reconfigure the US code AP work with UK ZD code.

We need to have remote access to the AP.

https://support.ruckuswireless.com/contact-us

Regards,
Abilash PR.

Photo of Peter W

Peter W

  • 95 Posts
  • 4 Reply Likes
Just seen this - I have ordered Ruckus gear from the USA and I live overseas.  Already ordered ZD1200, ICX switch (plus access points planned soon to be ordered).  If I buy my APs in USA too will everything work or will the equipment know I live overseas??  I never envisaged that this would be an issue!!
Photo of Peter W

Peter W

  • 95 Posts
  • 4 Reply Likes
Thanks Abilash, but would you or a colleague mind addressing my questions above before I go ahead and buy my Ruckus APs.  Thanks in advance!
Photo of Abi

Abi

  • 120 Posts
  • 58 Reply Likes
Hi Peter,

Sorry, I was informed that it is not possible to change country code now.

1. Switches aren't restircted to used on particular geo location, they can be used anywhere.
2. Licenses are tied to device's serial number, and certain licenses which come with controller (free) are already there they don't need any activation.

Thank you.

Regards,
Abilash PR
Photo of Peter W

Peter W

  • 95 Posts
  • 4 Reply Likes
So Abilash - to be crystal clear.  Even if I am overseas, if I but everything with US country code, will I be ok?  Will I also be able to buy additional licences for my ZD if I am overseas?  I need to know this before purchasing my APs.  Many thanks, Peter
Photo of Syamantak Omer

Syamantak Omer, Official Rep

  • 280 Posts
  • 103 Reply Likes
Hi Peter,

AP licenses has nothing to do with AP country code. You can buy licenses from anywhere and map with your ZD serial.

Even if you are in overseas and run your ZD with US country code, system will function but it may be against the local regulatory rules and regulations of overseas country.

Regards,
Syamantak Omer
Photo of Peter W

Peter W

  • 95 Posts
  • 4 Reply Likes
Great and thanks so much!   Was a little worried. 

Don't suppose you would mind have a look at this one?  No one has answered.

https://forums.ruckuswireless.com/ruckuswireless/topics/help-picking-the-right-ruckus-aps