FCX reload with dhcpv6 snooping

  • 1
  • Question
  • Updated 3 months ago
I've set up ipv6 dhcp snooping and this is causing the unexpected reload of the switch stack. The stack consists of 4 FCX-648GS, two with POE +. The FI version is 08.0.30t. The VLAN has a VE interface configured on an MLX-8. The strange thing is that another place has the same configuration and the same does not happen. Any idea what that might be?
Photo of RICARDO MUSSINI

RICARDO MUSSINI

  • 4 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Ben

Ben, Employee

  • 79 Posts
  • 23 Reply Likes
in 'show version', is it being reported as a warm or cold start? Also, please see if there is any data in 'dm save <1-4>. If you are seeing a crash, I would recommend opening a case with a show tech and output mentioned prior. 
Photo of RICARDO MUSSINI

RICARDO MUSSINI

  • 4 Posts
  • 0 Reply Likes
was warm start and there is a lot of data on dm save 1.
Photo of Ben

Ben, Employee

  • 79 Posts
  • 23 Reply Likes
Got it. Please submit a case with the following and we can analyze:

show tech
dm save 1
dm save 2
dm save 3 
dm save 4
Photo of RICARDO MUSSINI

RICARDO MUSSINI

  • 4 Posts
  • 0 Reply Likes
Done. Case ID: 00955174
Photo of NETWizz

NETWizz

  • 180 Posts
  • 57 Reply Likes
If you have not already, might want to send them the good site, too, so they can compare and check for differences.
Photo of RICARDO MUSSINI

RICARDO MUSSINI

  • 4 Posts
  • 0 Reply Likes
unfortunately we no longer have support for this equipment.