Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit

  • 1
  • Question
  • Updated 3 years ago
hello, I got this in the event log of the ZD: "Fail to initialize the configuration of all AP because number of AP in configuration exceeds system limit". But the ZD is licensed for 6 APs and has only 3 APs connected. Have you ever meet this before?
Photo of Jesus Olivas

Jesus Olivas

  • 3 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 51 Reply Likes
What version of ZoneFlex are you running and what is the uptime of the ZD?

If the ZoneFlex firmware is ~8.x it's possibly a known issue with the ethernet drivers. Secondary however to something going horribly wrong on the ethernet side (such as DOS attack, broadcast storm, etc)

If you are under support, I recommend you grab the ZD Debug file, and open a support case.
Photo of Jesus Olivas

Jesus Olivas

  • 3 Posts
  • 0 Reply Likes
OK many thanks Keith. I will double check the ZD firmware version
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 720 Posts
  • 151 Reply Likes
Hello Jesus,

Not sure why this is happening however i just ran this error message in syslog message guide on PDF page 12 - https://support.ruckuswireless.com/do...

it says that its a critical event and you shall - Delete APs from the list to allow
new APs to join.

Do you have another ZD or AP's in the network?
Photo of Jesus Olivas

Jesus Olivas

  • 3 Posts
  • 0 Reply Likes
Hello,
Many thanks for your answer. No, there are no other ZDs nor APs on the network. I will have a look at the AP list