error invalid input when trying to create ve interface

  • 1
  • Question
  • Updated 6 days ago
I'm getting the error invalid input when trying to create ve interface
Firmware version :  SPR08061c

I have created a VLAN , added an untagged port to created VLAN .
When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :

"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports  1/1/10"
Photo of dragos dimitriu

dragos dimitriu

  • 4 Posts
  • 2 Reply Likes

Posted 6 days ago

  • 1
Photo of Ben

Ben, Employee

  • 52 Posts
  • 9 Reply Likes
Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?
Photo of dragos dimitriu

dragos dimitriu

  • 4 Posts
  • 2 Reply Likes
Solved. It was an ip addr set on interface 1/1/10
All works now

Thanks