Hello,
There is the possibility of loading a Ruckus ZF7343 AP firwmare 3.1.2.0.150 directly, to be discovered by the VSZ-H controller. Thank you very much for the help
- 27 Posts
- 1 Reply Like
Posted 3 years ago
Michael Brado, Official Rep
- 3089 Posts
- 444 Reply Likes
No, you would load the Solo AP image, 100.1.0.0.432 which can connect to ZDs or SmartZone controllers.
Here's the link: https://support.ruckuswireless.com/software/838-standalone-ap-software-100-1-0-0-432-indoor-aps
Here's the link: https://support.ruckuswireless.com/software/838-standalone-ap-software-100-1-0-0-432-indoor-aps
- 27 Posts
- 1 Reply Like
Hi,
Thank you very much for the reply.
To connect an AP ZF7343 to the Virtual SmartZone High scale which image could be used? 100.1.0.0.432 Would serve us?
Thanks
Thank you very much for the reply.
To connect an AP ZF7343 to the Virtual SmartZone High scale which image could be used? 100.1.0.0.432 Would serve us?
Thanks
Michael Brado, Official Rep
- 2864 Posts
- 399 Reply Likes
Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.
Michael Brado, Official Rep
- 2864 Posts
- 399 Reply Likes
Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.
Related Categories
-
Ruckus Indoor APs
- 1842 Conversations
- 756 Followers
-
SmartZone and Virtual SmartZone
- 821 Conversations
- 418 Followers