Download firmware 3.1.2.0.150 for ZF7343

  • 1
  • Question
  • Updated 4 months ago
  • Answered
Hello,
There is the possibility of loading a Ruckus ZF7343 AP firwmare 3.1.2.0.150 directly, to be discovered by the VSZ-H controller.

Thank you very much for the help
Photo of Dimitri Stakov

Dimitri Stakov

  • 22 Posts
  • 1 Reply Like

Posted 5 months ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
No, you would load the Solo AP image, 100.1.0.0.432 which can connect to ZDs or SmartZone controllers.
Here's the link:  https://support.ruckuswireless.com/software/838-standalone-ap-software-100-1-0-0-432-indoor-aps
Photo of Dimitri Stakov

Dimitri Stakov

  • 22 Posts
  • 1 Reply Like
Hi,

Thank you very much for the reply.

To connect an AP ZF7343 to the Virtual SmartZone High scale which image could be used? 100.1.0.0.432 Would serve us?

Thanks
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.
Photo of Michael Brado

Michael Brado, Official Rep

  • 2049 Posts
  • 286 Reply Likes
Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.