Default super password after factory reset for unleashed configuration

  • 1
  • Question
  • Updated 2 months ago
  • Answered
What is username/password afrer factory reset . Super/sp-admin does not work for unleashed firmware
Photo of Dmytro Savin

Dmytro Savin

  • 3 Posts
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of fred bred

fred bred

  • 3 Posts
  • 0 Reply Likes
try super as lowercase
Photo of Michael Brado

Michael Brado, Official Rep

  • 2472 Posts
  • 344 Reply Likes
Repeating from another thread:
Unleashed initial configuration needs to be done using the APs default SSID, then browsing
to https://unleashed.ruckuswireless.com when you'll be prompted to create the network and
define your Admin credentials.  Setup is described in this knowledge base article for your
assistance:
https://support.ruckuswireless.com/answers/000005204

If you don't see a Configure.Me-XXYYZZ ssid in the air after factory defaulting your AP,
I suspect that they are not running Unleashed code.  Then you need the direct AP to PC(pre-configured with 192.168.0.x ) so you can access https://192.168.0.1 (super/sp-admin)and upgrade to your AP model Unleashed code.I just posted a new Unleashed 200.6.10.1.308 btw...
(Edited)