Could not assign ip address

  • 1
  • Question
  • Updated 9 months ago
  • Answered
I am configurating IXC7150-C12-2X1G. 
I could not assign IP address for switch
Someone can help me please.

UNIT 1: compiled on Aug 28 2019 at 13:38:53 labeled as SPR08090c
      (32536860 bytes) from Primary SPR08090c.bin (UFI)
        SW: Version 08.0.90cT213 
      Compressed Primary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
       Compiled on Thu Jan 31 07:08:55 2019

BYT-Ruckus-Spare(config)#ip address 10.22.3.44 255.255.255.0
Invalid input -> address 10.22.3.44 255.255.255.0
Type ? for a list
Photo of Thanh Tien Ton That

Thanh Tien Ton That

  • 9 Posts
  • 0 Reply Likes

Posted 9 months ago

  • 1
Photo of Vince

Vince, Employee

  • 16 Posts
  • 17 Reply Likes
Hello,
As you are using a Routing image (SPR08090c third letter R means for Routing), the IP address can't be at global configuration. Instead you can put it on interface, as you want on the management or virtual ethernet (attached to VLAN).

You can try this in config mode:
 - interface management 1
 - ip address 10.22.3.44 255.255.255.0

Hope this helps
Cheers
(Edited)
Photo of Thanh Tien Ton That

Thanh Tien Ton That

  • 9 Posts
  • 0 Reply Likes
Thank you very much.