Config MAX power

  • 1
  • Question
  • Updated 4 months ago
  • Answered
It is possible to adjust the power of a specific AP to the maximum using cli?
Photo of Rosa Martínez Martin

Rosa Martínez Martin

  • 3 Posts
  • 0 Reply Likes

Posted 4 months ago

  • 1
Photo of Abilash P R

Abilash P R, Employee

  • 52 Posts
  • 12 Reply Likes
Hi Rosa,

Command to adjust TX Power on the AP.

set txpower : set txpower <wifi name> <max | half | quarter | eighth | min | 0 to -24dB from max power>
                 -- Set transmit power

Command to verify the TX Power

get txpower : get txpower <wifi name>
                 -- Get transmit power


rkscli: set txpower wlan0 2

rkscli: get txpower wlan0
 wlan0 transmit power set to -2 dB from max power
I hope this will help.

Abilash PR