como convertir el AP H510 Series en una controladora?

  • 1
  • Question
  • Updated 2 months ago
como convertir el AP H510 Series en una controladora? 
Photo of damaris ballinas

damaris ballinas

  • 8 Posts
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of Test Debug

Test Debug

  • 4 Posts
  • 0 Reply Likes
Photo of Albert Pierson

Albert Pierson, Employee

  • 130 Posts
  • 112 Reply Likes
Hola Damaris,

Baja el "firmware" del suporte:

https://support.ruckuswireless.com/software/2049-ruckus-unleashed-ap-200-7-10-102-64-ga-refresh1-sof...

Puedes actualizar lo del AP - Maintenance::Upgrade > Local

Algunos articulos que puede ser util:

Convert Standalone/SZ/ZD managed AP to Unleashed Code

Steps needed to convert a Standalone or SZ/ZD managed AP to Unleashed Firmware
https://support.ruckuswireless.com/articles/000005720

Can I setup Ruckus Unleashed network remotely?

The initial configuration of the Unleashed Master AP *requires* that the user be connected wirelessly to the AP's Configure.Me-XXYYZZ SSID.
https://support.ruckuswireless.com/articles/000005204

Y el manual para Unleashed:

https://support.ruckuswireless.com/documents/2599-ruckus-unleashed-200-7-ga-user-guide



Espero que esto te ayuda para sus necesidades,

Gracias,

Albert