Client unable to get IP from ZoneController

  • 1
  • Question
  • Updated 11 months ago
Hi

Some of my laptop user could not get connected to the AP after firmware upgraded on the Zone Director.

Previously, the ZD is running on version 9.5.0.0.50 and now it was upgraded to 9.9.0.0.205.



Can anyone help on this.

Regards
John
Photo of John Ho

John Ho

  • 6 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Munish Dhiman

Munish Dhiman, Employee

  • 100 Posts
  • 14 Reply Likes
Hi John,

Could you check and clear the leases on the DHCP server and see if the client gets IP addresses .

Regards,
Munish
Photo of John Ho

John Ho

  • 6 Posts
  • 0 Reply Likes
Hi Munish

I had tried to delete the Client but it keep allocate back the same IP (169.xxx.xxx.xxx)

regards
John
Photo of Munish Dhiman

Munish Dhiman, Employee

  • 100 Posts
  • 14 Reply Likes
Hi John,

where is the DHCP server ? Internal or External . I had worked on exact same issue last week and found the issue with DHCP server . Where in after clearing the leases on dhcp server ,clients were able to get the IP addresses. how many clients connect to the wireless in peak hours and what is the lease time configured in the dhcp server ?

Regards,
Munish
Photo of John Ho

John Ho

  • 6 Posts
  • 0 Reply Likes
Hi Munish

The DHCP Server is on the ZoneDirector itself.

The DHCP lease time is 6 hours by default. That is the lowest in the setting.

Where can I go to clear off the leases on the DHCP Server.

Regards
John
Photo of Washington Rodriguez

Washington Rodriguez

  • 1 Post
  • 0 Reply Likes
Photo of Lobezno XMen

Lobezno XMen

  • 1 Post
  • 0 Reply Likes
Hola, yo he probado y al activar y desactivar sigue saliendo lo mismo


Trans:

Hello, I have tried and activated and deactivated it still comes out the same