Can't use web interface after upgrading to Ruckus Unleashed 200.8.10.3.278

  • 1
  • Question
  • Updated 3 weeks ago
  • Acknowledged
I upgrade my unleashed network to newest  Ruckus Unleashed 200.8.10.3.278 firmware
networks works and upgrade was successful
unfortunately i cant open unleashed dashboard after upgrade. unleashed app works, but with delays. I cant see for example mesh topology in app.
I already tried in Chrome, New Edge and old internet explorer
I can open login page, enter login and password, and nothing happend then...
Photo of Anton Kuzmin

Anton Kuzmin

  • 19 Posts
  • 1 Reply Like

Posted 4 weeks ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 3288 Posts
  • 520 Reply Likes
Hi Anton,

   Have you assigned a single Management IP for the Unleashed network, if so you should be able to reach
the dashboard with that IP address.  Else be sure you're wirelessly connected to an Unleashed SSID or on
the same LAN and try https:\\unleashed.ruckuswireless.com.  Does that help?
(Edited)
Photo of Sanjay Kumar

Sanjay Kumar, Employee

  • 171 Posts
  • 67 Reply Likes
Hi Anton,

Also, you might need to login to the AP CLI and check the "Master's" IP address with the command "get director", this will ensure that you are accessing the correct IP address on the GUI.