can't add R700 to ZD3000

  • 1
  • Question
  • Updated 4 months ago
Hello, i have new AP R700 & ZD 3000
FW  9.7.0.0 build 220, i know what i can't add this, because fw is to old. Needed 9.8 fw and above. Where i can take a new fw for connect ap to controller ?
Photo of Ilya Moskalev

Ilya Moskalev

  • 4 Posts
  • 3 Reply Likes

Posted 4 months ago

  • 1
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
Hi i will give you further a googledrive link to download it...let me just time to add to my drive
Photo of Ilya Moskalev

Ilya Moskalev

  • 4 Posts
  • 3 Reply Likes
okey thank you!
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
You will need to upgrade step by step (from older to most newer version) until the version of firmware you need.
I prepare a ''we transfer'' link so will have it soon
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
Photo of Ilya Moskalev

Ilya Moskalev

  • 4 Posts
  • 3 Reply Likes
Thank you i downloaded it and upgrade to 9.8.0.0.373 R700 added to controller
but after upgrade i see this
Your Support service expires in [90] days. Upgrading your Support service entitles you to future firmware upgrades. Please contact Ruckus Support for further assistance. [What's this?]
What happens after 90 days ?
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
Hi this message is only for support license ,if you don't need this don't worry ,personnaly this message appear on my ZD since 2years ,and i can use it without problem ;)
Photo of Ilya Moskalev

Ilya Moskalev

  • 4 Posts
  • 3 Reply Likes
thank you for help!
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
You're welcome guy
Photo of chbane mohamed

chbane mohamed

  • 11 Posts
  • 1 Reply Like
Hello I have a zd1200 and an access point t301s, and I can not add the access point on the controller, although I ping is well between the ap and the controller, the access point is new and updating On the controller is 9.12
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
Hi
How many AP did you have already on this ZD?
What about your AP licence,hiw many AP licence did yiu have?
Photo of Big Dog

Big Dog

  • 58 Posts
  • 9 Reply Likes
How many availlable licence?
Photo of chbane mohamed

chbane mohamed

  • 11 Posts
  • 1 Reply Like
his is not a licensing problem because I have a license of 36 ap, and I have only 35 ap connected
Photo of chbane mohamed

chbane mohamed

  • 11 Posts
  • 1 Reply Like
i acced to the ap by ssh and I notice that the command "set director ip"  does not exist, it existe only the commande ''set scg ip"
Photo of irvan irvan

irvan irvan

  • 16 Posts
  • 3 Reply Likes
You can download the firmware standalone (100.1) 839-standalone-ap-software-100-1-0-0-432-outdoor-aps
please follow my step before
Photo of irvan irvan

irvan irvan

  • 16 Posts
  • 3 Reply Likes
1. Reset the AP : you can see the reset button on the side of port AP
2. Go to 192.168.0.1 and upgrade to standalone firmware
Photo of chbane mohamed

chbane mohamed

  • 11 Posts
  • 1 Reply Like
I am far from the site now if you can give me your email to contact you when I will be on site, i think i already download this firmware but the ap Does not accept any firmware
Photo of irvan irvan

irvan irvan

  • 16 Posts
  • 3 Reply Likes
Sure, here is my email [email protected] 
Photo of chbane mohamed

chbane mohamed

  • 11 Posts
  • 1 Reply Like
thank you very mutch