Can I use poe out on ruckus zoneflex 7762 as data in ? | Ruckus Wireless Customer Community

Can I use poe out on ruckus zoneflex 7762 as data in ? This is because the data in can only receives power from the poe injector but doesn't connect to switch's data. In so doing I would like to feed power through data in, and feed data through poe out. In fact, in doing so the status led is not coming up.

Menelik Yabowork

4 Posts
0 Reply Likes

Posted 2 years ago

2 years ago

Michael Brado, Official Rep

3141 Posts
465 Reply Likes

I'm not clear about your question. I believe you say you are (would like to?) feed power thru data (PoE IN) port,
that is correct to power your 7762 AP, yes. You can connect another cable to the PoE OUT port, and not use
it to power another device, but simply to connect another device that can talk on your network (data in). Is that
what you are asking?

Comment

2 years ago

Menelik Yabowork

4 Posts
0 Reply Likes

Yes. I mean that.

Comment

2017-08-22T17:10:01+00:00

Michael Brado, Official Rep

3069 Posts
442 Reply Likes

And the answer is Yes, you can use the PoE OUT port to connect external devices that do not need POE power themselves.

(Edited)

2017-08-24T19:25:39+00:00

Menelik Yabowork

4 Posts
0 Reply Likes

Thank you for the answer. But when I tried that the AP's status LED is not lighting, and the ZD is not accessing the AP. But it is possible accessing the AP and the ZD from a laptop through a switch. Is there something I missed or have to do to get it work? I have also factory reset several times. I can see the interface POE In down . But the POE out is up when I accessed the AP through laptop.