Can I do the port forwarding while using Zone Director 1100 to control 5 different APs.

  • 1
  • Question
  • Updated 2 years ago
Photo of Dhils Paul

Dhils Paul

  • 4 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Ramprakash

Ramprakash

  • 19 Posts
  • 2 Reply Likes
Dear Dhils,

There is no way you can do port forwarding inside the ZD.its not designed for that purpose.
Could you please elaborate on what you plan to acheive?

regards

Ramprakash
Photo of Dhils Paul

Dhils Paul

  • 4 Posts
  • 0 Reply Likes
Hello Ram

Thanks for the reply

I have trouble in using face-time since I switched to Ruckus system. 
does it help if I bypass apple cna feature.

regards
Dhils
Photo of Ramprakash

Ramprakash

  • 19 Posts
  • 2 Reply Likes
Hi Dhils,

You can take a look at couple of posts below which could help. Ruckus System treat multicast traffic and needs little tweak based on the issue or problem...

https://forums.ruckuswireless.com/ruckuswireless/topics/connection_fails_between_ipad_and_apple_tv_v...

https://forums.ruckuswireless.com/ruckuswireless/topics/7372-ap-standalone-devices-cannot-talk-to-ea...

Give them a shot...

if these does not help then write back with more details whats NOT working, what works etc what has been tested, which version of firmware on controller AP model etc

regards

Ramprakash
(Edited)
Photo of Dhils Paul

Dhils Paul

  • 4 Posts
  • 0 Reply Likes
Hi Ram

Its been in the same configuration as advised in the provided links. 

Regards
Dhils
Photo of Dhils Paul

Dhils Paul

  • 4 Posts
  • 0 Reply Likes
Hi Ram

still we are facing problem in face timing. I checked all the configurations as you advised. Model is ZD1106 an dversion is 9.8.1.0 build 101.

please advise

Dhils