I have a Brocade ICX 7450-48F switch that is being used as my Distribution Switch for my small network. It has a single 1G connection to a Cisco 3560 via single mode fiber.
The ICX is configured with
The Cisco device is configured with
trunk encapsulation dot1q
switchport trunk native vlan (X to match the ICX)
switchport trunk allowed vlan 1 - X
switchport mode trunk
mls and qos configurations
The Issue: The ICX connection to the Cisco device is flapping, meaning I am losing connection to the downstream Cisco device. A Show Log reveals that interface e 1/1/3 is receiving STP State messages for each of my configured VLANS, meaning that each VLAN in the log is cycling through its Listen Learn Forward State
for example :
VLAN X Port 1/1/3 STP State -> Listening (MakeFwding)
VLAN X Port 1/1/3 STP State -> Learning (FwDlyExpiry)
VLAN X Port 1/1/3 STP State -> Forwarding (FwDlyExpiry)
I don't understand why STP/BPDU is frequently updating itself causing the interface to bounce. Could this be avoided if I add a second 1G trunk between the ICX and Cisco device? We are not seeing any input or output errors on either side of the link so I didn't want to jump to the possibility that the fiber is dirty.