I am trying to upgrade my T300 outdoor AP with the OutdoorAP-100... firmware but I keep getting the "bad firmware header magic" error message. The AP is currently on Unleashed and does not emit wireless, It was previously used with a controller but I don't have a controller at the moment and would like to use it as standalone
- 7 Posts
- 0 Reply Likes
- Frustrated
Posted 4 weeks ago
Phil Coverdale, Principal Technical Support Engineer
- 26 Posts
- 15 Reply Likes
Hi Martin,
Please let us know which version of software the AP is currently running an which version you're trying to install.
Thanks.
Please let us know which version of software the AP is currently running an which version you're trying to install.
Thanks.
- 7 Posts
- 0 Reply Likes
Hi there. Thanks for replying.
The AP currently has an unleashed firmware with the following details.
Trying to upgrade to Standalone AP Software 100.1.0.0.432
The AP currently has an unleashed firmware with the following details.
Device Name:
RuckusAP
Device Location:
GPS Coordinates:
MAC Address:
74:3E:2B:2A:73:B0
Serial Number:
941604905934
Software Version:
3.1.2.0.134
Uptime:
2 mins 47 secs
Current Time (GMT):
Sun Jan 15 20:47:37 2017
Trying to upgrade to Standalone AP Software 100.1.0.0.432
- 7 Posts
- 0 Reply Likes
@phil. Is it possible to upgrade this AP?
- 121 Posts
- 14 Reply Likes
have you tried reflashing the firmware back to standalone via CLI?
https://support.ruckuswireless.com/articles/000001551
https://support.ruckuswireless.com/articles/000001551
- 121 Posts
- 14 Reply Likes
from the looks of it.. it seems to have the firmware from the controller.. so best to reflash it to standalone 104.0.0.0.1347.bl7 solo AP. .. after that do a hard reset and everything see if wifi works.. then reflash it to unleashed. 200.6.10.X is the one I recommend.
(Edited)
Michael Brado, Official Rep
- 3069 Posts
- 442 Reply Likes
Martin, you AP shows it was last controlled by an SZ (3.1.2.0.134).
Follow instructions from the KBA Hyak pointed to, and load either a Solo image if you only have this one AP, or Unleashed for T300, which has a different look and feel, and requires you to build an Unleashed network.
Follow instructions from the KBA Hyak pointed to, and load either a Solo image if you only have this one AP, or Unleashed for T300, which has a different look and feel, and requires you to build an Unleashed network.
Related Categories
-
Ruckus Outdoor APs
- 568 Conversations
- 383 Followers