Avoid client changes on the switch routing

  • 1
  • Question
  • Updated 3 months ago
Hello, so today as part of my learning I tried to connect a wi-fi router to my network. After a little while all the vlan was down. Looked into the running config and saw that the port had an ip assigned and also a route was placed for 0.0.0.0/0 which madr my other pcs to stop having internet access.

Is there a way to avoid this?

Thank you!
Photo of Fernando Flórez

Fernando Flórez

  • 22 Posts
  • 6 Reply Likes

Posted 3 months ago

  • 1
Photo of Martin

Martin, Official Rep

  • 279 Posts
  • 68 Reply Likes
Hi Fernando,
What version are you running on the switch, and also please put the config changes you made in the forum so we can check what might cause it.

Regards
martin

Photo of NETWizz

NETWizz

  • 48 Posts
  • 15 Reply Likes
You need at least one (1) interface in a VLAN that is up for the route to be placed into the routing table.  Please check this.
Photo of Fernando Flórez

Fernando Flórez

  • 22 Posts
  • 6 Reply Likes
This was it! Thank you!