Approving AP in ZoneDirector

  • 1
  • Question
  • Updated 3 years ago
I am using ZoneDirector 3000 with ZoneFlex 7982. ZD and ZF had default IP address 192.168.0.2 and 192.168.0.1 respectively.
I issued 'show ap' in ZD console. It gave no entries.
I enabled DHCP server in ZD. ZF fetched IP address from ZD. Then 'show ap' command shows ZF.
Please tell if there is any way, I can detect ZF without enabling DHCP server.

Thanks in advance,
uv.
Photo of uv s

uv s

  • 8 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Rahul Koul

Rahul Koul, Employee

  • 76 Posts
  • 13 Reply Likes
Hi,

Have you set the AP's Ip to static? If not can you try it first?

Secondly, SSH into the AP using a SSH client like "Putty" and enter the ZD's Ip address. Here are the commands for it:

set director ip x.x.x.x
reboot

where x.x.x.x is the ip address of the ZD

Hope this helps.

Rahul
Photo of Michael Brado

Michael Brado, Official Rep

  • 2183 Posts
  • 301 Reply Likes
Hello UV,

Ruckus APs require L3 discovery today, using DHCP Option 43 or DNS, but
new and about to be announced RuckOS 3.0 will include LLDP to "help" Access
Points to find available ZDs on the network, restoring an L2 discovery method.
You would still use a "set director ip a.b.c.d" to direct your APs to a ZD on a
different subnet.