AP don't join to vSZ on 3.5.x.

  • 1
  • Question
  • Updated 3 months ago
Hi.

Some APs don't join to vSZ on 3.5.x.

I captured packets between Ap and SZ.

It shows "encrypt alert" same as below again and again.



I have also tried it at another vSZ.

It happens same.

Anyone exprienced?

Regards.
Photo of Jeronimo

Jeronimo

  • 172 Posts
  • 19 Reply Likes

Posted 3 months ago

  • 1
Photo of Ramesh goud Guniganti

Ramesh goud Guniganti

  • 10 Posts
  • 0 Reply Likes
Have opened the Ports on Firewall
Photo of Jeronimo

Jeronimo

  • 172 Posts
  • 19 Reply Likes
AP and vSZ is located on Routing path without FW.

Because we tested it on vsz-E, it have no staging-zone.
Photo of Ramesh goud Guniganti

Ramesh goud Guniganti

  • 10 Posts
  • 0 Reply Likes
All those AP's are Hard reset? if not do hard reset.
Photo of Martin

Martin, Official Rep

  • 208 Posts
  • 48 Reply Likes
What version software is running on the AP?
can you ping the vsz when you logged into the AP?

regards
Martin
Photo of Jeronimo

Jeronimo

  • 172 Posts
  • 19 Reply Likes
vSZ version is 3.5.1.0.296.

AP's version which join to vSZ is 104.x and 9.13.x.

Ping is good.

I'll update futher info after another test.
Photo of Martin

Martin, Official Rep

  • 208 Posts
  • 48 Reply Likes
So for 104.x you need to use 
Set scg ip x.x.x.x

and for 9.13.x lwapp2scg needs to be enabled. Although i suggest you to load 104.x.x.x code to the AP .

Kind regards
Martin