AP Different IP Pool can't connect to Zone Driector 1100

  • 1
  • Question
  • Updated 3 years ago
  • (Edited)
Hi All,

I've Problem to connect the AP which try connect to Zone Director.

Explanation :

- Zone Director (Located at Factory Office) = 172.30.32.230/24
- Factory Office AP (Using Ruckus R300 & Z7372) = 172.30.32.231 - 242 /24
- (PROBLEM) Head Office AP ( Using Ruckus Z7372) = 172.30.24.231 - 233 /24

(Notes : Factory Office & Head Office Have been Link using WAN connection)

My Question :

How to add Head Office AP to Zone Director (Located at Factory Office)

Many Thanks

Perdianto (Indonesia)
Photo of Perdianto Halim

Perdianto Halim

  • 6 Posts
  • 0 Reply Likes
  • Confused

Posted 3 years ago

  • 1
Photo of Max O'Driscoll

Max O'Driscoll, AlphaDog

  • 333 Posts
  • 82 Reply Likes
Zone Director  is on 172.30.32.xxx subnet and
Head Office AP is on 172.30.24.xxx a different subnet.

So now your masking is crucial.
For consistency change the Head Office AP onto a 172.16.32.xxx IP so that it is on same subnet.

/24 gives 255.255.255.xxx

Feel free to point out if I'm being stupid here.
(Edited)
Photo of Monnat Systems

Monnat Systems, AlphaDog

  • 761 Posts
  • 163 Reply Likes
You need to try the command in the POST on below URL: Command has to be tried in CLI mode of Head office AP.

https://forums.ruckuswireless.com/ruckuswireless/topics/change_zone_director_ip_address


Hope this helps.

PS: I am assuming that AP is able to reach from office to Factory.