When joining two my 7372 (currently at 9.7.1.0.17) AP to the ZoneDirector (10.1.0.0.1515) I get the following:
( MAC ADDRESS INTENTIONALLY DELETED )
* currently AP is at 9.7.1.0.17
2. Entered the CLI and tried to force update the AP with the following:
rkscli: fw force-update xxx.xx.xx.xx
fw: Updating rcks_wlan.main ...
**fw(7723) 172.16.17.18: CTL Get Error
OK
( MAC ADDRESS INTENTIONALLY DELETED )
2018/06/20 12:12:55 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 12:10:28 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 12:07:46 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 12:05:14 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 12:02:44 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 12:00:12 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 11:57:40 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 11:54:53 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 11:52:26 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
2018/06/20 11:49:55 Medium AP[38:ff:xx:xx:xx:xx] joins with different firmware/custom file version and is being upgraded.
ACTIONS TAKEN
* currently AP is at 9.7.1.0.17
2. Entered the CLI and tried to force update the AP with the following:
rkscli: fw force-update xxx.xx.xx.xx
fw: Updating rcks_wlan.main ...
**fw(7723) 172.16.17.18: CTL Get Error
OK
3. Enabled FTP on the Zonedirector to look for AP Specific Files:
Index of /zf7372/10.1.0.0.1515/
[parent directory]
rcks_fw.bl7 0 B
rcks_fw.bl7.bkup 0 B
rcks_fw.bl7.bkup.version 14 B
rcks_fw.bl7.main 0 B
rcks_fw.bl7.option 28 B
zf7372_1010_cntrl.rcks 140 B
FILE SIZES SEEM TO BE TOO SMALL ( same sizes appear in all model-specific directories) ?
What is the next step now ?
Thank you.
N.B. I have two (2) other 7372s that have upgraded without a problem.
Posted 8 months ago
Friend,
I suggest that you do the manual upgrade by following these steps:
1 - Upgrade to version100.1.x.194
2 - After the configuration, point the ap to the controller with the set director IP x.x.x.x
3 - Get the get version (see if the update worked)
3.1 - Get the get director (to see if the LWAPP connection between Ap x wlc is established
3.2 - Do the show fw all (to see if the two images have been updated) - If not, I suggest a new update - or a new note for wlc;
4 - If ap does not provision, repeat these steps with firmware 104.0.1397.
Please post the result here.
NOTE: You must enter the ruckus site, and verify that this version of the 10.1.15 x controller supports this AP model.
I suggest that you do the manual upgrade by following these steps:
1 - Upgrade to version100.1.x.194
2 - After the configuration, point the ap to the controller with the set director IP x.x.x.x
3 - Get the get version (see if the update worked)
3.1 - Get the get director (to see if the LWAPP connection between Ap x wlc is established
3.2 - Do the show fw all (to see if the two images have been updated) - If not, I suggest a new update - or a new note for wlc;
4 - If ap does not provision, repeat these steps with firmware 104.0.1397.
Please post the result here.
NOTE: You must enter the ruckus site, and verify that this version of the 10.1.15 x controller supports this AP model.
Thank you for the reply.
As of this time, the APs have already been recognized by the ZD and have been updated as well.
1. I took route of a direct firmware upgrade to 104.0.0.0.1347 ;
2. Configured the static addresses the APs ( yes, I used static addressing for the APS and the ZD), and then after a reboot, the ZD recognized them and provisioned them with 10.1.0.0.1515
Don't want to tinker with it for now :-)
As of this time, the APs have already been recognized by the ZD and have been updated as well.
1. I took route of a direct firmware upgrade to 104.0.0.0.1347 ;
2. Configured the static addresses the APs ( yes, I used static addressing for the APS and the ZD), and then after a reboot, the ZD recognized them and provisioned them with 10.1.0.0.1515
Don't want to tinker with it for now :-)
(Edited)
Michael Brado, Official Rep
https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...
Jonathan Daigle