We have about 30 Ruckus 7762 AP's installed currently in the network. We have a new company onsite that we are going to setup vlan's on our cisco switches and to be on their own network. Now they want to use the wireless AP's for their network also. Currently our network is all using ether port 1. Is the only way to activate a second SSID and have it refered to their network, is to pull another cable to Ether port 2 on AP's? This is going to be a lot of work, so wanted to make sure it is our only option. To use 1 AP for 2 networks and 2 different SSID's that are seperate.