7982 stops working, keep having to reboot

  • 1
  • Question
  • Updated 3 years ago
I've had a 7982 running fine for about a year and a half. Recently within the last couple of months, the AP keeps going down. Only a reboot will get it going again. Our company depends heavily on it, so I ordered a new 7982. I have eliminated everything within our LAN as the cause, switches, POE injector, cabling etc. I am about to try the new unit but I sure would like to identify the cause. Could it be a device on Wifi that is causing it to jam? We have no more than 60 clients on it. I am not sure what to look for in the log to see if it is a device that is causing the problem. Software version is and like I said it's been running great for quite a while. When it stops working, I cannot get to it from the browser and I cannot ping it and naturally no client can connect. I doubt a firmware upgrade would make a difference. I would be willing to pay for support if that would that help? TIA
Photo of Eva Bridgewater

Eva Bridgewater

  • 1 Post
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Martin

Martin, Official Rep

  • 315 Posts
  • 80 Reply Likes
Are you using the AP as standalone? If so, try a more recent release of 104.x.x.x code