7731 DFS and country code Croatia not existing

  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi,

We are using 7731 in Croatia, but there is no country code Croatia to chose from.

Is it possible to put Croatia in country codes?

Is there a way to see what frequency rules apply to other countries in Europe (for example Germany) to check whether the frequency rules are more or less the same?

Are there any CLI commands for this?

Best regards,

Miro
Photo of Miro H

Miro H

  • 10 Posts
  • 0 Reply Likes

Posted 4 years ago

  • 1
Photo of Ram

Ram

  • 29 Posts
  • 5 Reply Likes
Official Response
Hi Miro,
on the other question, When Radar signal is detected then 7731 - root bridge will be forced to vacate the channel on which it was operating and go for a new channel irrespective whether auto channel or static channel was used. this is as per DFS requirement.

Hope it helps.

regards

Ramprakash
PS: Take a look at this doc which i refer whenever i am in doubt about DFS and its operation
http://www.nts.com/pdf/whitepapers/6_...