7731 bridge webserver stopping and starting in log file

  • 1
  • Question
  • Updated 3 years ago
  • Answered
Is anyone else seeing the webserver stopping and starting a lot on their 7731 radios? It's very frustrating because I have to re-authenticate in the webGUI each time. Software 9.2.0.0.168.

12 ISC-RU7-PAR-SOU daemon.notice rsmd[17]: webserver ....... [stopped] (0.034)
Sep 2 00:41:13 ISC-RU7-PAR-SOU daemon.notice rsmd[17]: webserver ....... [started] (0.401)
Sep 2 00:45:12 ISC-RU7-PAR-SOU daemon.notice rsmd[17]: webserver ....... [stopped] (0.038)
Sep 2 00:45:13 ISC-RU7-PAR-SOU daemon.notice rsmd[17]: webserver ....... [started] (0.470)
Photo of Matt

Matt

  • 25 Posts
  • 7 Reply Likes

Posted 4 years ago

  • 1
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 50 Reply Likes
This sounds like the daemon is crashing for some reason. Best course of action is to open a support case. https://support.ruckuswireless.com/co...
Photo of Todd

Todd

  • 53 Posts
  • 7 Reply Likes
Yes, exact same issue. I opened a case with Ruckus, they had me re-install 9.2.00.168, but the issue continued. RMA issued for both devices (root & non-root). Seems very odd to me that the issue occurs with both of them.

I hope to get the replacements up this week.

I'd be curious to hear how your issue was resolved.

Thanks,
Todd
Photo of Matt

Matt

  • 25 Posts
  • 7 Reply Likes
I never bothered to open a case as it's happening on probably 80% of our gear. It does't effect the operation of the radios and an RMA of all our radios would not be financially viable. I never noticed it happening on 9.0 firmwares.

We just get good at remembering the passwords to the radios :)
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 50 Reply Likes
You might be seeing this issue (ER-588) which is addressed in the just-released 9.2.0.0.169 release.

https://support.ruckuswireless.com/do...
Photo of Matt

Matt

  • 25 Posts
  • 7 Reply Likes
Lovely! I'll give it a go Keith. :)
Photo of Todd

Todd

  • 53 Posts
  • 7 Reply Likes
"Corrected too-frequent GUI resets (ID ER-588)
Added memory reserved for GUI application to allow the GUI to operate normally
for extended periods of time."

That makes a lot of sense. I hope that resolves the issue as these bridges seem pretty stable otherwise.
Photo of Todd

Todd

  • 53 Posts
  • 7 Reply Likes
I upgraded my 7731 pair today.

The internal web servers responsiveness is way faster... very responsive.

And moving around within the web interface for 10+ minutes I'm happy to say that I've yet to experience a random log out, aka web server stop.

Issue is completely resolved.
Photo of Matt

Matt

  • 25 Posts
  • 7 Reply Likes
Just to follow-up, this firmware also fixed the issues on our radios.
Photo of Keith - Pack Leader

Keith - Pack Leader

  • 860 Posts
  • 50 Reply Likes
Excellent, thx Matt!