7731 beacon problem

  • 1
  • Question
  • Updated 3 days ago
  • Acknowledged
  • (Edited)
 i am using ruckuss 7731.Root and non-root bridges.Distance is 270 meter. 
But they disconnection suddenly over 10 second in 3 hours




it is log attachment.
i know there are too many devices around.
---------------------------
Non root Bridge Rts/cts thresold: 65535
root bridge rts/cts threshold     : 256
--------
non-root rx rssi : 42 ack rssi: 47
root        rx rssi : 39 ack rssi: 48


Maximum required trafic 50 Mbps.

should  i change Rts/cts value for solution problem?

What can i do ?
Can you help me?
Thank you very much for your help 
Photo of seckin onder

seckin onder

  • 9 Posts
  • 0 Reply Likes

Posted 6 days ago

  • 1
Photo of Michael Brado

Michael Brado, Official Rep

  • 2839 Posts
  • 397 Reply Likes
You have very good signal strength.  The NRB logs show a dissassociate with a reason code of 63 (reserved), that I don't recognize.
Reason code 6 is Class 2 frame received from non-authenticated STA (ok).

What channel are you using?  I wonder if there has been some strong temporary interference.


Have you set the Distance on both sides?

Can you try running the Channel Optimization and see if it selects a different channel this time?

See the 7731 User Guide here:  https://support.ruckuswireless.com/documents/196-zoneflex-7731-user-guide
(Edited)
Photo of seckin onder

seckin onder

  • 9 Posts
  • 0 Reply Likes
i using 108 channel with smartselect option.
i set 2 Km distances.
According to log,what do you think problem ? do you thinh it is interferenced?
Would you recommend that i use the  "Wireless spectrum analyzer " program? İf yes,Which antenna side do i use? But you dont think interfecerenced ?
i am so confused

Photo of seckin onder

seckin onder

  • 9 Posts
  • 0 Reply Likes

today i had the same problem again.
The non-root bridge and bridge log is the file is attached. Logs are always the same.

i tried smart select options and then manually change the channel. But the problem still is not solved.

  • According to the logs, How do you i know which antenna side a lot of broadcasting?
  • Should you offer a free third-party wireless analysis program?
  • According to the logs, Which antenna should i try with this program?
  • According to logs is the path, the method i followed is it true?
  • What do you suggest after analyzing them?
Please help me. Because  i am in a difficult situation



 



(Edited)
Photo of Michael Brado

Michael Brado, Official Rep

  • 2836 Posts
  • 397 Reply Likes
I don't have access to hardware... Please open a ticket with our Tech Support, who will dig deeper into the logs, and can do better research, thanks!


https://support.ruckuswireless.com/cases/new
Photo of seckin onder

seckin onder

  • 9 Posts
  • 0 Reply Likes
Thank you