Could not assign ip address
I am configurating IXC7150-C12-2X1G. I could not assign IP address for switchSomeone can help me please.UNIT 1: compiled on Aug 28 2019 a...
-Carr%C3%A9Orange(256x256)_large.jpg)
Vince
Joined on December 4, 2018
15
Likes received
0
Conversations posted
13
Replies posted
12
Conversations followed
Conversations
What is the password for configure.me ssid after factory reset on R510?
I have an R510 that was originally Unleashed, then flashed to run on my Cloud WiFi network and have now removed the unit from the network...
icx port status mode selection button not functioning
I've got a number of ICX 7150 switches deployed, on which the port status mode selection button for the LED mode doesn't seem to work, or...
ICX-7150 (08.0.90b) - LACP/LAG Layer3+4 hash algorithm support ?
Hello,I'd like to ask if ICX-7150 switches do support Layer3+4 hash algorithm in LACP/LAG. I'm connecting them to linux servers (2-4 NICs...
Struggling with one DHCP server, and multiple VLANs on ICX 7150 Switch image
I have one DHCP server in default VLAN. I have multiple VLAN (voice) and I want the ports on the VLAN to grab dhcp addresses from additi...
Is there an official way to request features?
Over the years, I've used a lot of various CLIs and each have their own awesome ideas. So, is there a way to request features?If so, tab ...
How to access a locked out ICX 7250 with SPR08090ufi? console aaa enabled, no local users
Hello everyone, I've done a stupid thing, it seems.I did erase the startup config on an ICX 7250 with aaa console enabled. Result seems t...
ICX7150 trying to access Ruckus Wireless Device Registrar
Hi,ICX 7150-24 version 08.0.80dT211.There
are continuous attempts to access 35.160.244.72 and 52.34.241.9 over
443/tcp via Management...
ICX 7150 48P - Ports turned off
Good morningI have 2 ICX 7150 48P switches in stack.Image version SPS08080dBoot version mnz10114POE version icx7xxx_poe_02.1.0.b002In bot...
ICX7150 no output show inline power
Hi AllWe have an ICX7150-24P-4X1G POE 24-port, with 10 R510 AP's. All the AP's are down but switch is up leading to me a POE issue. S...
Ruckus ICX 7750 IPV6 hardware support forwarding
Hello dears,The ICX 7750 switches supports IPv6 in hardware, in order to provide wire-rate forwarding for IPv6 packets? Thank you!
ICX 7750 traffic shaping
The ICX switches family supports QoS Traffic Shaping feature? If yes:. The switch can be perform actions to the packets that exceeds the ...