Client Bridge - Ruckus or other?
I am setting up a ruckus mesh network with a handful of R710 APs and a ZD. The wireless environment is very difficult/unpredictable (we ...
Sandeep Gupta
Joined on April 9, 2018
12
Likes received
0
Conversations posted
28
Replies posted
18
Conversations followed
Conversations
Cloudpath DPSK Pool Questions
I am tired of dealing with Apple and others making changes that cause issues with our certificate based authentication. Apple recently c...
Ssh is not accepting username and password
i have configured crypto key ,username and password. when we are trying to ssh its asking username and password but when we are typing us...
Best way of configuring two R700 APs
Hi, Just got my hands on two R700 AP's which I am planning on using to fully cover my house. What is the best way of setting up two R700...
througput issue on Iphone SX only 100 Mbps
Hi all, i've R710 running using ZD3000 10.1.2.0 build 120, while testing using a laptop we got 300 Mbps upload & download for speedtest.n...
Inventoried unleashed waps to current firmware
I have 17 units in stock and would like to know the best practice to update these units to the current firmware and place them back into ...
Does Unleashed Firmware works fine on Rackus 7372 AP?
Hi Team, We had Rackus 7372 AP with Software Version:104.0.0.0.1347 setup in our office, but lately from past two months we were facing a...
Ruckus AP with multi SSID into ICX Switch
Longtime user of Ruckus AP's, but new to the ICX switches. I've been using the ICX Switches in test-bench scenarios to see how I like th...
M510- How to access the real time GPS location after it was implemented in a moving vehicle.
Suppose If I implement few of the M510 in the school buses now how would I get the real time GPS location of the buses. From where I am a...
How to change the vlan for LAN1 and LAN2 ports on H320
I am deploying H320 APs connected to Ruckus Cloud and can not find a way to change the VLAN used by the LAN1 and LAN2 ports. Traffic fro...
R510 AP and ICX 7150 - APs shutdown and do not power back on
Here is my setup: Comporium Zipstream Gigabit fiber main box gets Ethernet from junction box in garage. The comporium box hands out dhcp...
VSZ migration to new IP
So, I currently have a VSZ VM server on one Public IP Subnet, I need to migrate it to a different Public IP Subnet. I haven't been able t...
how to flash stand alone to ruckus unleashed
now that there is no show ap info option in the unleashed version how do we flash the stand alone this article is not longer validhttps:/...
New site no documentation
I have inherited a site with a Zone Director 1200 and 10 access points. The previous "IT guy" documented absolutely nothing and registere...
Ruckus Unleased R510 2nd AP PWR - Blinking Green
Hello,I am trying to add my 2nd AP (r510 unleashed) to my network. I already have a single r510 unleashed in gateway mode. When connec...
The indoor R510 APs reboot from time to time giving the error message "AP lost SCG more than 7200 seconds "
The indoor R510 APs reboot from time to time giving the error message "AP lost SCG more than 7200 seconds ". APs are managed by a Virtua...
7762 outdoor APs - 5.15 - 5.25 GHz band (channels 36 to 48) output power
We have ZoneFlex 7762 APs purchased before 2014. We would like to take advantage of the 2014 FCC rule change that allows outdoor usage of...
what is this problem ?
Feb 8 08:44:03 RuckusAP daemon.err wsgclient[464]: crSocketInit:243 crSocketConn failed ret = 124 Feb 8 08:44:03 RuckusAP daemon.err ws...