Does vlan pooling work with a SZ down?
Hi guys, I'm wondering if a SmartZone goes offline the VLAN pooling "feature" configured within the SSID still works. I know that an AP ...
Ravi Teja
Joined on May 11, 2018
1
Likes received
0
Conversations posted
11
Replies posted
11
Conversations followed
Conversations
I have a problem with freeradius on 802.1x
Hello I have a problem with zonedirector 3000 and 802.1x (freeradius) i want to authenticate users when they connect to our SSID, i confi...
Assign different IP range to WLAN
2 WLANS manage by ZD 1200PWLAN = for local workstationsWifiWLAN = for internet accessDHCP servers assigning 172.22.114.0/23 IPsPWLAN is w...
SNMP OID for Access point LAN status ?
Hello, I have R600 , R710 and ZF7982 access points. Does anyone know the SNMP OID to use to monitor the status of the LAN1 and LAN2 port...
Client Timeout for WISPR
Does anyone think that the timeout for the wispr authentication on the smartzone 100 should be allowed to be longer than 10 days? I feel ...
Remote syslog server flooded with debug messages regardless of severity level selected in log settings
I set up a Splunk server to index syslog messages from a SmartZone 100. I enabled syslogs in the Smartzone Web GUI and immediately starte...
Updating Firmware SZ100 - Applying Wispr Script Necessary?
Not a 100% clear on what the SCG-52951_3_4_0_0_967-v1_0.ksp script is for. I only have 1 SZ100 and 20 APs, 1 internet line. Is the Wispr ...
HOTSPOT WISPR, CNA and LOGOUT variables
Hello everybody, have a question about Logout page in a Captive Portal external (hotspot wispr). If user on an iPhone connects via browse...
Spark Master goes down after upgrading to SCI 5.0.
Atfter upgrading SCI from 3.x to 5.0, Spark Master goes down. How do I recover it? How do i check which deamon is problem? If I can c...
configuration hotspot(WisPr) local in VSZ-High
Hi, I'm setting up a Hotspot on the Virtual Smart Zone - High 3.2 ruckus platform. For this I turn to AP Zone >> Hotspot (WISPr) Porta...
how do i delete a cluster member on SZ100
how do i delete a member from a Cluster on SZ100 ?