Conversations

Photo of Raju Koirala
GRE Tunneling
I am trying to tunnel all AP data traffic thorugh vSZ-H and have configured the Ruckus GRE too.But when I choose the "Tunnel WLAN traffic...
  • 1 me too
  • 4 replies
  • Question
Photo of Raju Koirala
Guest access portal asking for guest pass every time
We have implemented Guest Access at a client end,Client's IT team generates the Guest pass and assigns it to their guests.The guests here...
  • 1 me too
  • 1 reply
  • Question
Photo of Raju Koirala
Disable notifications Globally on vSZ
We have a vSZ running v3.5 and some 30 customers to whom we have allocated different management domains.Customers are reporting of variou...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of yassine ben slimane
H500 keeps updating configuration
I have a SCG SmartZone 104 with OS version 3.4.2.0.152 ( the recommended one). I have a Cisco network. I have configured the DHCP server ...
  • 1 me too
  • 7 replies
  • Question
Photo of Raju Koirala
Connecting to island SSID
Is there is anyway to get connected to AP via island SSID which is broadcasted by AP with Default configuration?I heard that we can actua...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Raju Koirala
High PHY Errors and Noise floor on AP
We just upgraded our vSZ-H from 3.4 to 3.5,After upgrade what we can see is that the APs show heavy PHY errors(milliions) and High noise ...
  • 1 me too
  • 2 replies
  • Question
  • Acknowledged
Photo of gpmpa
Can I create 2-node vSZ cluster setup with each node having different VLANs.
I am creating 2 node vSZ cluster. Nodes will be put in two different sites. As per network architecture, VLANs are not span between sites...
  • 2 me toos
  • 8 replies
  • Question
  • Answered
Photo of Raju Koirala
Layer 2 Access Policy Limitation
We have a vSZ-H running 3.4.0.0.976 and using L2 access policy in certain WLANs.What I see is that after the number of MAC addresses has ...
  • 1 me too
  • 1 reply
  • Question
  • Answered
Photo of Frikkie Gersbach
How do you monitor an AP connected to vSCG from a 3rd party software like PRTG ?
Hi , just wanted to know if anyone has successfully used PRTG and SNMP to get ruckus AP status down ? i am using vSCG 3.4.1 and all my A...
  • 1 me too
  • 5 replies
  • Question
Photo of Raju Koirala
Backup site for vSZ-H
We have a vSZ-H running 3.4.0.0.976 at one of Private data centers.We are planning to install another one at a different location as a ba...
  • 2 me toos
  • 2 replies
  • Question
  • Answered
Photo of Raju Koirala
Clients getting frequently disconnected on 2.4GHZ Radio while its is running smoothly on 5GHZ in same network
Clients are getting frequently disconnected on 2.4GHZ Radio from R500 while its is running smoothly on 5GHZ in same network.Connected dev...
  • 1 me too
  • 5 replies
  • Question
Photo of Raju Koirala
APs at same zone being marked Rogue by each other.
We have a vSZ running 3.2.1.0.193.The problem is ,it is now showing same zones APs as Rogue,SSID spoofing is shown frequently in log and ...
  • 1 me too
  • 1 reply
  • Question
Photo of Raju Koirala
Same SSID under vSZ(3.2.1.0.193) is being shown Rogue by Some APs in the Same Zone
We have a deployment of 80 APs at a site and everything is fine except some of the APs in same Zone are marking each other Rogue and is s...
  • 1 me too
  • 2 replies
  • Question