MESH speed/distance experience
I would like to get your experience on the speed/distance of your MESH networks. I'm specifically looking for any tangible data on MESH l...
Primož Marinšek
Joined on September 4, 2013
49
Likes received
17
Conversations posted
396
Replies posted
237
Conversations followed
Conversations
Conversations 41 - 60 of 225
Blocking Rogue SSIDs
Is it possible to block SSIDs being broadcast in our area? A local ISP is offering an open SSID that students are using to bypass our fil...
Protect the wireless signals from interference.
Hello,
Our company using Ruckus Zone director 3000 and zf7982 Access Point with OS version 9.6.2.0 build 13
I am looking for feature...
Max Clients Allowed ZoneFlex7363 & ZoneFlex7762
I want to know the maximum number of clients that can be associated to a ZoneFlex7363 and ZoneFlex7762, ZoneDirector puts the default 100...
Big Problem...
There is a big problem on the Sw version of controller from 9.6 to 9.7.2.0.15 upgrade on the AP's 2741 and 2942. It causes to destroy com...
zoneflex 7982 not configuring in 40 MHz
hi,
I have zoneflex 7982. I set channel width of 2.4G into 40 MHz. The settings are shown in the image. I create an SSID and associa...
7731 NLOS perfonmance
Is there any experienced user tell me about 7731's NLOS perfonmance ? Or need an advice about 1.5 km link between two building just for a...
Maximum rate limting
Zone Director 9.7.0.0 build 220
I am trying to limit my guest WLAN access to above 20mbps threshold, but the options max out at 20mbps...
help the installers log mac/serial for customer
Ruckus needs an easily removed sticker on the AP with serial number and mac address. This will allow installers to stick them on the inst...
Can a device be forced to connect to only a certain AP?
Hello, I was wondering if it is at all possible to make certain devices only connect to certain APs? For example I want Device 1 to only ...
ZF7352 Lifetime
Hello,
Short Question:
Is there any Information for the Lifetime of the "old" AP ZF7352?
One of my Customers need some single-band...
Configuring managed AP via CLI
Hello,
Is it possible to configure access point via CLI even though AP is managed by ZD? Simply I need to change name of few APs witho...
AP's fail to come back online after ZD update
I am wondering if anyone else has had this same issue and has found a workaround. I updated ZD3000 twice in the past 3 weeks. Each time...
Controlling remote APs over an MPLS circuit.
We are about to install a vendor provided 400 mile mpls circuit (100Mb). Site "A" presently has a ZD3000 running 150 APs. We would like t...
Changing the bss-minrate for my access points
Hello,
I've recently had a visit from a corporate IT representative. He suggests we change the bss-minrate so that the signal distanc...
throughput issue w/ ZF 7962
I just stumbled on to a weird problem that's completely baffling me... I have a ZoneDirector 1000 controller and three ZoneFlex 7962 devi...
Is the Ruckus 7982 appropriate for my use case?
I have a single level, open floor plan, ~4000 square feet office space in a building with many neighboring wireless networks. We curren...
Avoiding huge broadcast domains
hello,
For avoiding huge broadcast domains will be great if Ruckus has the feature "vlan range" or "vlan pooling" (it has differen...
A way to use 10MHz channels
Hi
I'd like to use 10MHz wide channels on bridges and out-door APs on 5GHz (7762 all models).
I know I can use some 10MHz channels ...
MESH for stand alone APs
How about now that Ruckus is moving into SMB market, you enable MESH feature on stand-alone APs too. Tying this to a ZD IMO is a function...