Conversations
Conversations 1 - 20 of 225
we have wi-fi setup at work using a zone director, and use guest access, with a hidden SSID, WPA-2 personal, and shared password. It is ...
PHY Errors, Noise Floor, Airtime interpretation in ZD
I would like to find out what values for PHY Errors, Noice Floor, Airtime total, busy, RX, TX are good and what values are bad?
If I'm...
Give flashing LED option to APs
I would like to see a flashing option for LEDs on APs to help find them faster when users either don't document their location or they do...
Ruckus AP's in Ekahau Survey Pro
Hi we are surveying a Ruckus install with Ekahau Survey Pro and we are seeing other vendor AP's populating the AP device name window but ...
User fails authentication too many times in a row when joining WLAN
Hello,In the ZoneDirector I get multiple messages of clients who fails to authenticate too many times in a row when joining a WLAN. We co...
Users can't find characters in DPSK password on their keyboard. Can we limit the characters when DPSK are generated?
My users are given a Batch DPSK when they enrol at the school. Unfortunately, some of them can't find some of the characters on their dev...
AP installation height ?
Any suggestions about the installation height (min / max) above the floor (or other baseline locations) for the typical ZF AP?
And spe...
Support Info Massage meaning
There are a lot of following messages and degraded the performance of AP.
Oct 16 05:52:21 RuckusAP daemon.warn Eved: MLME-REPLAYFAILUR...
how can I manage two Ap one is from US code the other is not with zonedirector ?
I have zonedirector 1106 and 2 zoneflex 7982 AP, one is from US and the other is from Turkey how can I connect them together ? When I t...
repeater configuration on RF2942
Hi,
I have a customer with 9 AP RF2942 installed.
Now the customer wants to add another AP in an area not covered by signal without l...
Airtime fairness and improving media access
Hi guys,
Is airtime fairness set by default? We are finding problems with data traffic when AP reach the number of 30.
Let me expla...
Ceiling vs Wall mount for 7982?
Ceiling vs Wall mount for 7982? What is the optimal position and where can we see full radiation pattern map for its antenna array? Since...
bss-minrate vs. smart-roam
Looking for some clarification of the impact of bss-minrate vs. smart-roam (as well as some best practices on setting them). Is it an iss...
Capturing 802.11 frames with Ruckus Wireless access points and Wireshark
Spotted on Twitter
Our Community Champ Primoz (@jazzycow81) just posted a very nice howto blog on setting up packet capture with Ruck...
Do i need a ZoneDirector for Wireless Roaming?
Hi,
Do i need a ZoneDirector for Wireless Roaming?
One of my Customers need a Wireless Network for his Warehouse. There will be abou...
ZF 7372 & 7352 antenna elements numbers?
Hi I couldn't get any info regarding antenna elements on ZoneFlex 7372 & 7352 datasheet. 7352 does not have pattern and elements at all. ...
5ghz preference
Is there any way to steer client devices toward using the 5ghz band rather than not offering 2.4 on the access point? Almost all of the ...
iPad 2s losing connection
We are new to Ruckus (last summer) running ZD 9.6.2.0 build 13. We updated to that firmware version on the advice of support, who also t...
Connect seperate subnets without NAT
I have x20 Zoneflex7343's managed through a ZoneDirector in my school (i'm responsible for the IT) and things have run well for two years...
What are the disadvantages to enabling mesh?
I understand that the upstream access points will have to handle the load from any mesh-connected APs, but is this the only disadvantage?