What are the disadvantages to enabling mesh?
I understand that the upstream access points will have to handle the load from any mesh-connected APs, but is this the only disadvantage?
Primož Marinšek
Joined on September 4, 2013
49
Likes received
17
Conversations posted
396
Replies posted
237
Conversations followed
Conversations
Conversations 21 - 40 of 235
SmartSelect vs specific channel for 7982
Hi. I have the Ruckus 7982 set with SmartSelect for the channel. I notice that it uses channels that are not necessarily the recommende...
802.1x auth using LDAP/AD
Hi guys,
We are using 802.1x + Radius IAS on all of our WLANs to authenticate users, there is any way to use 802.1x and LDAP/AD?
On...
Multicast to multiple concurrent devices
Configured 7982 with either multicast or directed-multicast and after 8 concurrect users video stream freezes! Users are Android or Windows
Rugged APs
Will RW have any ruggedized APs, like Cisco has for some of its models.
In warehousing and some other locations, sometimes there is du...
Phone Test Show different Result -65 dbm
We had test Ruckus with few few different device of Android and we found same AP get different result at the exact same location. some de...
Is Channelfly usable in real world scenarios?
While ChannelFly is a truly remarkable technology, I'm wondering if people have found that it's usable in real-world scenarios.
For ...
R500 AP, Ascom i62 and Mitel 5000 MiVoice Office Issue
We have a Mitel 5000 phone system (MiVoice Office 250) with Ascom i62 handsets on ZF R500 network of AP's. The i62 handset signal is poo...
Trunking Both AP Ethernet Ports for 802.11ac
Considering the R700 boasts 1300Mbps of throughput using 802.11ac, which is more than a standard gigabit port, is there a way to trunk/lo...
IPTV over WLAN-Bridge using ZoneFlex 7982
We have to connect an IPTV-Box in a room, where no ethernet cabling exist. We are using 2x ZoneFlex 7982 as WLAN-Bridge using 802.11n. At...
Touchstar Boston 8500 Handheld Scanner Disconnecting
Hi all,
We have quite 40 Touchstar Boston 8500 (http://www.touchstar.co.uk/product_mo...) Hand Held Barcode scanners that connect via ...
ZD3000 and R700 limits at a large public event
I am planning to supply WiFi for a large public event, about 10000 people present. I estimate that at least half will connect and use the...
Filter SSID to be broadcast by an AP using ZD3000.
I have multiple ZF APS manage by my ZD3000. I also have multilple wlan in my configuration. Is it possible to make a specific AP broadcas...
ZF710: MU-MIMO and BeamFlex
Is there a white paper or other reference explaining how MU-MIMO works in conjunction with BeamFlex?
What is the maximum range, line of site, down a hallway for the R300 & R500?
I'm in a Hotel and want to position the R300 in the best location. The hallway to guest rooms is 130 feet long. Is it best to put it in t...
Disassociation frame send by Android device to Ruckus access point
Anyone got an idea what would force an Disassociation frame send by Android
device to Ruckus access point, reason code: "Disassociat...
Client issues while connecting to ZF 2741 access points running 9.7 code
Hey all, Let me describe the issue. The client has 2 ZD3000 series located somewhere in Antwerp Belgium. The customer has several sites ...
R500 & R600 with external antenna options.
For HD and some other verticals one absolutely needs the option of connecting external directional antennas to an AP, so R500 and/or R600...
Description change request - n/ac-Only
Under the Configure :: APs :: AP Groups in the ZD menu there is an option to enable N/AC-Only operation under both bands. I would ask fo...
Kernel Panic restarts anyone?
Seem to be getting a few Heartbeats Lost and "Kernel panic" restarts since the 9.8 upgrade - one or two a day, 7962 models only so far, r...