Conversations

Photo of Skaap2.0
T310C Rejected by SZ100 ACL
Hi all, I'm experiencing ACL rejecting issues of a new T310c im trying to add to a SZ100. Below is the error im seeing on the event logs....
  • 1 me too
  • 13 replies
  • Question
Photo of Scott Oram
R510 AP and ICX 7150 - APs shutdown and do not power back on
Here is my setup: Comporium Zipstream Gigabit fiber main box gets Ethernet from junction box in garage. The comporium box hands out dhcp...
  • 1 me too
  • 11 replies
  • Question
Photo of Chitu Alexandru
No Power ruckus r700
Hello, first of all i want to say i am a newbie at this chapter with routers but I have a problem. I have a ruckus r700 and whe. I plug T...
  • 1 me too
  • 5 replies
  • Question
  • Acknowledged
Photo of Sam Chan
Firewall settings for ICX 7150
Assuming ICX with dhcp  ip behind Firewall, in order for ICX 7150 (ver 8.0.80ca) with sw registrar feature) to communicate with vSZ 5.0 c...
  • 1 me too
  • 4 replies
  • Question
  • Answered
Photo of Marvin Medina
ICX to vSZ using dhcp option 43 and 60
Hi,I have been configuring our ICX 7150 switch as the DHCP Server to our vSZ using option 43 and option 60. This works perfect for our Ru...
  • 1 me too
  • 2 replies
  • Question
  • Answered
Photo of Roberto Baccara
vSZ Upgrade to 5.0.0.0.675 from 3.6.1.0.227
Hello,I'm planning to upgrade our VSz from 3.6.1.0.227 to 5.0.0.0.675. I've 8 AP in a single zone, with 5 SSID and URL filtering configur...
  • 1 me too
  • 7 replies
  • Question
  • Answered
Photo of Tom Moseley Moseley
Windows DHCP server migration broke Ruckus Wireless Network
We migrated our DHCP server from an old server to a new one when we decomissioned our admin network and now just have a single domain and...
  • 1 me too
  • 5 replies
  • Question
Photo of Paul McGuire
AP firmware 3.6.0.0.709 High Connection Errors
I have upgraded my Vsz to 3.6.0.0.510 and upgraded the APs to 3.6.0.0.709.  After the upgrade i noticed that almost every AP had a high p...
  • 10 me toos
  • 19 replies
  • Question
  • Answered
Photo of NewsFool
Currently recommended firmware for vSZ
I am about to deploy a new instance of vSZ with about 40 R610 APs. The support section for vSZ downloads says the "recommended firmware...
  • 1 me too
  • 6 replies
  • Question
  • Answered
Photo of KeVinBon
Connection Failures
hi all, i m facing a problem with "connection failures". all the APs are in 99% of connection failures. i opened a case 00569211, but i d...
  • 2 me toos
  • 1 reply
  • Question