ZD1100 unreachable
We had a total network hickup this afternoon. After resetting all devices (router, main switch, ZD & modem) all was running nice again, e...
Monnat Systems
Joined on March 29, 2014
200
Likes received
11
Conversations posted
912
Replies posted
668
Conversations followed
Conversations
Conversations 1 - 20 of 664
Apple device's WiFi problems (unstable)
Hello, We got around 375 clients on our 40 APs (R700) where there are 47 Mac's (Pro and Air) & 67 iOS Devices who are having huge wifi p...
Cannot reach managed AP's via browser.
My R600's are managed by a ZD1200. I can't reach the individual AP's via their IP address in the browser. I'm guessing I missed something...
OSX Clients Connected to AP, but not passing traffic
Anyone else experiencing issues with OSX clients connecting to APs, then randomly not being able to pass traffic/browse the internet? We...
To cloud or not to cloud the Zone Director?
Our ZD1100 and Aps are end of life. We are evaluating the refresh routes. The question we have is what are the pros and cons of using a v...
Mobile device mangement - MDM
Hey WiseGuys, Does anyone know if we have preferred and tested partnerships with 'mobile device management' (MDM) suppliers?
when using T710 AP's PoE Out port, I Must used power injector?
I'm studing for outdoor AP... T710's PoE Out port is compared to other APs (when installation busstop, Kiosk, etc..) but i can't find Con...
Getting a US-bought ZoneFlex 7363 to work on a UK ZoneDirector
I am in the UK and I have a ZoneFlex 7363 bought from the US. It is set to US and cannot be changed.
What are the issues with connecti...
disable https on ap's managed by ZD
Hi, I'm running multiple ZD's on 10.x tree and found out that all AP's have https access enabled. Going via AP and AP group settings in ...
Get CLI config files of ZD ,like cisco's show run
I want to use a cli like cisco's 'show run' to get the cli configuration. And then enter this configuration to a new deivce by CLI.
I ...
does ruckus work with Gmail and if it does how to setup
have used the setup with
[email protected]
smtp.gmail.com
port 587
username [email protected] (accualy used my gmail account)
pa...
unleashed AP supports printer?
does unleashed Access Points support third party printer? i want to connect a printer for guest access, need help thank you!
Social Media Login using specific Google domain on ZoneDirector 1200
I have set up a WLAN using Social Media Login with Google accounts. Everyone using a valid Google account is able to connect to the WLAN....
ZD Captive Portal Logout
Is there a way for a user that has successfully logged into the ZD built in captive portal to manually logout of their session?
I get the "bad firmware header magic" error message when i try to upgrade T300 AP from 100.x to 104.x
New Construction - Need Wifi Enabled
We are buying a new construction house. It will be 2 floors with a basement. We'll likely only have a cable modem supplying the data. ...
R310 unleashed (2nd AP) keeps building network
Hello, I want to add a second R310 Unleased AP to my network. The 1st AP is working fine, no problems at all. However, when I add a seco...
HOW TO HARD RESET ZF-7782
How do I factory reset the ap?
DFS channel switching monitoring
In a enterprise setup (for example with the vSZ) how do you guys monitor DFS channel switching related issues? With auto channel and the ...
register R500 to zone director
Dear All Master, We have AP R500 and ZD1100. Designed to R500 managed by ZD1100, but we have a problem, the problem is R500 cannot regis...