Gateway mode speed limitations
I setup an R310 in gateway/router mode and noticed that I am limited to ~150mbps download and ~5mbps upload. I subscribe to and consisten...
MLG
Joined on March 21, 2014
27
Likes received
10
Conversations posted
79
Replies posted
55
Conversations followed
Conversations
Printer "unauthorized" on WLAN
I am trying to connect a HP OfficeJet 8600 to an encrypted WLAN. I get a connection error on the printer: "Unable to connect to the netw...
Unleashed Internet "Disconnected"
Randomly I am having issues with APs that require a reboot to regain Internet. In order to access the GUI IP I have to roam to another AP...
Disable LED's, Optimize channel settings, rogue APs
I have an R310 running on the cloud and I am trying to turn off the LEDs (PWR, CTL, 2.4, 5). I can't seem to find this enable/disable opt...
Ruckus Unleashed 200.2 Upgrade Troubleshooting
Hopefully the following procedure is helpful to others. We found that when upgrading to the latest Ruckus Unleashed 200.2 firmware that s...
Apple CNA not working 200.2
Just updated an Unleashed network to 200.2. The guest network is no longer bringing up the authentication screen on Apple devices, users ...
ACL not working correctly
I'm setting up an ACL for a WLAN to rate limit iOS devices and allow all others by default. When I apply this method, all non-iOS clients...
Noisy AP during tx
I'm getting complaints that AP's (7352) are making noise when data is being transmitted. Sounds like a rapid ticking noise. Some AP's are...
Maximum rate limting
Zone Director 9.7.0.0 build 220
I am trying to limit my guest WLAN access to above 20mbps threshold, but the options max out at 20mbps...
Isolating guest traffic
I have enabled a guest SSID on my network and I have selected isolated wireless client traffic from other clients on the same AP and isol...
VLAN configuration for ZoneFlex 7372 and ZD
Hello there,
I have configured 2 SSIDs/WLANs on my ZoneDirector, one which belongs to the native VLAN, and a test 'guest' WLAN which i...
Resetting ZoneDirector factory defaults - will I loose AP's?
I'm in need of resetting my ZoneDirector to factory defaults, my 6 7352 APs are managed via ZD, will I loose their configuration or will ...
