R600,SZ100 is taking overload latency with 30 clients
R600 aps are working fine(answers about 1-5ms to gateway LAN), until 30+ clients connect to the SSID on same AP(300-600ms to gateway LAN)...
Jamie Walmsley
Joined on February 16, 2015
3
Likes received
4
Conversations posted
19
Replies posted
16
Conversations followed
Conversations
Smart Zone New installation - zoneflex r500 not connecting.
we have setup a new SmartZone 100. Have also configured the IP helper option 43 with this hex(0x060e3139322e3136382e39392e323533) we are...
Im running 3.5.1.0.862 firmware. Clients are getting dropped randomly
Im running 3.5.1.0.862 firmware. I have one site on my system that is having all kinds of problems with staying connected to the network...
When roaming from one AP to another, dropping telnet sessions
We have a 5 week old Ruckus install. All firmware is current. Over the last 8 days, we have started to experience telnet sessions droppin...
Client load balancing between 2.4 and 5, how does it work?
Our football field has 4 large light poles and 25 foot up each pole we have hung a T710 outdoor AP. We have an SSID that personal devices...
I'm trying to acquire a valid logon session, but I get "no active session"
Beginner here, I'm following API guide to acquire a login session. I'm testing with curl command like this curl https://{server-ip:ser...
Ruckus CLI Airtime Stats
Hi, Can anyone tell me why the Airtime stats obtained via "get airtime <radio interface>" appear to go over 100%? Example output: get ...
Mac clients losing connection to the gateway
We've been having a strange issue for months. Some Mac clients on the Wi-Fi lose connectivity to the gateway intermittently for a few sec...
Client looses access after roaming to "new" ap
Client loses internet access after roaming. Clients have to disconnect and connect again to gain access.
Ruckus ZD: Rejoin WLAN log messages
Im currently looking into an issue whereby we see Mac device's loosing connectivity after a channelfly change on R600s on a ZD3K controll...
Roaming between bands
Hi, I understand that clients roaming between Ap's should be a seamless process, however is that also true if a client roams from the 2....
Zonedirector + transmit power settings
Hi, Can somebody explain to me how the transmit power settings are calculated on a ZD? For instance, lets say I have a 7372 currently s...